Vous êtes ici > Nouvelles


Precautions for installation of metal coil Draper


Precautions for installation of metal coil Draper:

1. Positioning

The accuracy of line drawing and positioning is related to the success or failure of metal coil Draper installation. Firstly, measure the fixed hole distance and the size of the required installation track.

2. Install the metal coil drawer rail

(1) The metal coil drapery orbit can be divided into single, double or three orbits. When the window width is greater than 1200mm, the metal coil Draper rail shall be disconnected, and the bending at the disconnection point shall be staggered. The bending shall be gentle curve, and the lap length shall not be less than 200mm. In general, the metal coil Draper box is installed first. The heavy metal coil drawer rail shall be equipped with screws, and the concealed metal coil drawer box shall be installed with rails. The spacing of small angle of heavy metal coil Draper track shall be increased, and the specification of wood screw shall not be less than 30mm.

(2) Install the lifting clip, rotate the clip 90 degrees to connect with the track, and install the lifting clip onto the top plate with self tapping screw. If it is a concrete structure, expansion screws need to be added.

3. Install the metal coil drawer

(1) Correct the connecting fixator, install the rod or iron wire, and pull it on the fixator. Make sure that the elevation of the room is the same.

(2) For the installation of standard metal coil Draper track (double track), its foundation width should generally be more than 15cm, and the monorail can be reduced according to the appropriate situation.

4. Adjust the position


For floor type metal coil Draper or metal coil Draper hanging over the table, the width of the window sill should be allowed when installing the track to avoid obstruction when the metal coil Draper sags.

Précédent:Selection of metal coil curtain fabric

Prochaine:The general situation of wire mesh laminated glass

Articles connexes

leave your message